东日韩二三区_啪啪啪毛片_日韩专区在线播放_男人吃咪咪视频

Sea Number mechanical installation points outlined small CNC lathes
Small CNC lathe installation method and other CNC lathes installation is different, the number of rich sea professional production of CNC lathe machine, product knowledge and experience, the number of mechanical sea today to introduce you to install elements of small CNC lathes.
1, lifting and transportation
Small CNC lathes and lifting in place, use the special lifting tool provided by the manufacturer, it does not allow the use of other methods. It does not require special lifting tool should be used in accordance with the instructions provided for wire rope and lifting parts in place.
2, foundation and location
Small CNC lathe should be mounted on a solid basis, the location should be away from the vibration source; avoid direct sunlight and heat radiation; placed in a dry place, to avoid affecting the moisture and air flow. If the machine near the vibration source, the vibration isolation must be set on the basis of four weeks ditch.
3, small CNC lathe installation
Small CNC lathe placed on the basis of leveling should be in a free state, and then uniformly locking bolt. For general machine tools, meter reading level does not exceed 0.04 / 1000mm, for high-precision machine tools, a level not to exceed 0.02 / 1000mm. When measuring mounting accuracy, should be carried out at a constant temperature measuring instrument is subject to a period of time fixed temperature before use.
The above describes the installation points small CNC lathes, hope can give you help, the Soviet Union always engaged in research tools and test equipment, development of design and manufacturing for nearly 30 years. Has a wealth of technical expertise and practical experience in production, the Soviet Union always Tel: 13953800780.