东日韩二三区_啪啪啪毛片_日韩专区在线播放_男人吃咪咪视频

For turn-milling composite lathes, daily maintenance work is crucial. It can not only improve the efficiency of the machine but also effectively extend its service life. However, there are strict standardized steps for the maintenance of turn-milling composite lathes. Today, our CNC lathe manufacturer Hai Shu Machinery will share with you the five major maintenance measures for turn-milling composite lathes.

1、 Maintain the cleanliness and hygiene of the turning and milling composite lathe

The turning and milling composite lathe needs to be kept clean, and the surface of the machine should be kept clean and hygienic to avoid impurities such as dust and oil stains affecting the use effect and lifespan of the machine. The moving parts should be promptly wiped and cleaned to prevent dust from entering the interior of the machine.

2、 Regularly refuel and lubricate

All parts of the machine need to be lubricated regularly to ensure normal operation and reduce wear. Especially for the lathe bed and guide rail, sliding friction weakens the wear resistance of the parts in question. If insufficient oil is added, it can cause damage to the parts. Regular oil lubrication is necessary to remove fuel dirt and check if the oil level is correct.

3、 Check if the electrical equipment is in good condition

The electrical equipment of the turning and milling compound lathe, such as motors, encoders, motor sensors, etc., need to be regularly inspected to ensure their normal operation. The inspection process includes cleaning and checking whether the wiring of electrical equipment is standardized, checking whether the voltage is normal, etc. Unqualified areas need to be repaired in a timely manner.

4、 Check the accessories and tools of the machine

The accessories and tools of the turning and milling composite lathe need to be regularly inspected and replaced in a timely manner. Inspection includes checking the firmness of various fixtures, the wear and replacement of cutting tools, as well as checking whether the guide rails and sliding blocks are normal and well sealed.

5、 Regular maintenance and repair

The use of the machine requires regular maintenance and repair, such as adjusting the transmission chain, replacing the brake cylinder assembly and brake cover, and cleaning and inspecting the electronic devices that are regularly replaced. After using steel parts for a period of time, they should also be reground or repaired using other methods to restore the assembly range and treatment quality of the parts.

The above are the five maintenance measures for turning and milling composite lathes compiled and released by our CNC lathe manufacturer Haishu Machinery. We hope they will be helpful for everyone in using turning and milling composite lathes in the future.